↓

Wiring Pi

GPIO Interface library for the Raspberry Pi

Wiring Pi
Home Menu ↓
Skip to primary content
Skip to secondary content
  • Home
  • News
  • Examples/How-To
    • Blink
    • Gertboard and WiringPi
      • Blink
      • 12 LEDs
      • Buttons
      • Connecting to the Gertboard
    • Adafruit RGB LCD Plate and wiringPi
    • Quick2Wire and wiringPi
      • Install and Testing
      • Testing the I2C modules
      • The 16-pin GPIO expansion board
      • The Analog interface board
    • Testing wiringPi v2
    • More Testing: Game of Life
  • Reference
    • Setup
    • Core Functions
    • Raspberry Pi Specifics
    • Timing
    • Priority, Interrupts and Threads
    • Serial Library
    • SPI Library
    • I2C Library
    • Shift Library
    • Software PWM Library
    • Software Tone Library
  • Extensions
    • I2C: MCP23016
    • I2C: MCP23008 & MCP23017
    • SPI: MCP23s08 & MCP23s17
    • Shift Register: 74×595
    • I2C: PCF8574
    • I2C: PCF8591 (Analog)
    • I2C: SN3218 – LED controller
    • Writing your own
  • Download and Install
  • Pins
    • Special Pin Functions
  • The GPIO utility
    • Pin Test
    • I2C: MCP23008 and MCP23017 extensions
    • SPI: MCP23s08 and MCP23s17 extensions
    • The sr595 extension
    • Gertboard Commands
    • PiFace Commands
  • Dev Lib
    • PiFace
    • Gertboard: Analog
    • PiGlow
    • LCD Library (HD44780U)
  • Contact
Home→Blog→Published 2016 → December

Monthly Archives: December 2016

wiringPi updated to 2.36

Posted on December 15, 2016 by Gordon

wiringPi is now at version 2.36. An update was required to support kernels 4.8 onwards. There are also a few additional fixed here – some new sensors added in to supports the Raspberry Pi foundation weather station and some security … Continue reading →

Posted in General Update, wiringPi Relase | Tagged bcm2835, C, gpio, raspberry pi, wiringPi
© 2023 - Wiring Pi Proudly powered by WordPress  Weaver II by WP Weaver
↑